Skin IQ

An effective and intuitive solution for the prevention and management of pressure injuries.

Skin IQ® is a waterproof, vapour permeable, single patient use coverlet for use in combination with a pressure redistribution surface to help prevent pressure injuries. This powered coverlet uses Negative Airflow Technology® (NAT) to continually draw away excess moisture and help to control temperature at the skin/surface interface (microclimate), providing a simple yet sophisticated solution to enhance the performance of a support surface with microclimate managing properties.

Microclimate refers to the conditions of moisture and temperature at the point(s) of skin/surface interface¹, and is a key factor for patients at risk of skin maceration and breakdown. Excess moisture and/or temperature can increase skin sensitivity to the damaging effects of pressure, shear, and friction².

References:
1. National Pressure Ulcer Advisory Panel, European Pressure Ulcer Advisory Panel and Pan Pacific Pressure Injury Alliance. Prevention and Treatment of Pressure Ulcers: Clinical Practice. Guideline. Emily Haesler (Ed). Cambridge Media: Perth, Australia; 2014.
2. International Review. Pressure Ulcer Prevention: Pressure, Shear, Friction and Microclimate in Context. A Consensus Document. London: Wounds International, 2010.

• A waterproof, vapor-permeable top layer that offers a bacterial and viral barrier¹

• Negative Airflow Technology (NAT) continually draws excess moisture away from the skin / mattress interface. Bench studies show that Skin IQ Microclimate Management (MCM) removes 3.8 times more moisture at the skin/mattress interface than the same mattress without Skin IQ MCM²

• Bench studies show that Skin IQ MCM reduces staphylococcus aureus growth by 3.1 logs over a 24 hour period. A percentage reduction of greater than 99.9%.³ *

• Bench studies show that Skin IQ MCM significantly reduces odor at the skin/mattress interface when compared to the same surface without airflow⁴

• Designed for compatibility with pressure redistribution mattresses on the market today (eg, AtmosAir™ 9000 Mattress Replacement System)

Simple features, sophisticated performance

Effective for your patients
• The Skin IQ MCM provides a moisture vapor transfer rate (MVTR) of 130g/m2/hr²
• Top layer material helps reduce shear and friction‎⁷
• Quick, intuitive setup and maintenance
• Low profile design

*The level of treatment stated indicates theoretical levels only

1. Arjo Data on File, Test Report Viral Barrier Property of Top Sheet of Skin IQ Coverlet – Test Report 100018376 pg. 3 & Test Report 100019009 pg. 1-7.
2. Arjo Data on File, Study SIQ2010-57. Test Report – Skin IQ Microclimate Manager/Low Air Loss (LAL) Coverlet Functional (Post-Stress) Testing – Test Report 100018343 pg. 6, 12.
3. Arjo Data on File. Test Report – 100077042.
4. Arjo Data on File, Assessment of Skin IQ Microclimate Manager Capability to Mitigate odor – Test Report 100018484.
5. Arjo Data on File, Skin IQ Reusable System Functional Test – Test Report 100014338 pg. 6.
6. Arjo Data on File, Skin IQ Microclimate Manager 60 Day MVTR – Test Report 100016748 pg. 3.
7. Arjo Data on File, Skin IQ Coefficient of Friction – Test Report 100018362 pg. 1.

Weight and dimensions
Weight capacity kg	227 kg
Weight capacity lb	500 lb
Overall Length mm	2134 mm
Overall Length in	84 in
Overall Width mm	914,4 mm
Overall Width in	36 in
Depth/Height of surface mm	178 mm
Depth/Height of surface in	7 in
Coverlet Height mm	6,35 mm
Coverlet Height in	0,25 in
Packaging	Single unit or 4 pack
Electrical
Voltage	100 - 240 VAC
Frequency	50 - 60 Hz
Ampere Rating	0.5A
Power Supply	DCV, Reusable and cord
Operating Temperature Range C	14 - 35 °C
Operating Temperature Range F	57.2 - 95 °F
Storage Temperature Range C	-29 - 60 °C
Storage Temperature Range F	20.2 - 140 °F
Classification	B
Standards	IEC60601-1:2006