AtmosAir Velaris
Designed for comfort without compromising therapy in both reactive and active mode
_Product_Page_Main_Image.jpg)
_Product_Page_Main_Image.jpg)
 830x470_Product_Page_Main_Image.jpg)
AtmosAir Velaris accommodates a 'One Surface Strategy' as it can replace all but the most advanced automatic surfaces with one easy to use, flexible mattress system.
AtmosAir Velaris is a flexible and cost effective, adaptable alternating pressure system that can be used across a wide range of patient risk categories and care settings.When connected to the pump, AtmosAir Velaris transforms to an alternating therapy surface that can achieve full pressure offloading¹ with AltoVac® technology.
Without the pump attached, it provides reactive pressure redistribution through the ARM® (Air Redistribution Module) to maintain comfort and pressure levels in each air cell.
Reference:
1. Clark M (2021), Comparative Testing of Interface Pressure Performance of Seven Hybrid Surface Technologies Using a Weighted Mannequin. Arjo whitepaper.
Instant step-up therapy
AtmosAir Velaris performs as a dedicated alternating pressure surface in active therapy mode, but also provides non-powered pressure redistribution when the patient pressure risk level does not require alternating therapy.
AltoVac® Vacuum Technology
With the pump connected, the AltoVac Vacuum Technology sucks air out and inflates air in cycles to provide alternating pressure (AP) therapy with offloading capabilities.
Infection Control Design
Premium cover designed to last 2.5 times longer than ‘standard’ type covers when being used in the same environment. Welded seams and a watershed flap over the full length of the zipper to help prevent fluid ingress.
Comfort and Full Offloading
A top layer of visco-elastic foam and a base layer of firm foam is built into each air cell, offering comfort while eliminating the need for an additional foam layer between the patient and the air cells which can compromise active therapy. Offers firm foam perimeter to support ingress and egress.
Microclimate Management
Powered directly from the AtmosAir Velaris pump, the system can also offer the full microclimate and comfort benefits of Skin IQ®, without impacting the alternating pressure performance. Compatible with both Skin IQ standard and bariatric coverlet.
ARM® (Air Redistribution Module)
In non-powered mode, AtmosAir Velaris is an open pressurized system. The Velaris ARM — Air Redistribution Module maintains a predefined pressure level inside the cells.
Heel zone with active therapy
With a sloped heel zone combining AltoVac vacuum technology alternating air cells with a heel slope, the AtmosAir Velaris hybrid system offers offloading capabilities in the vulnerable heel area.
QuietConceptâ„¢ Pump & Automatic dimming LEDs
Pump has silent operation at 19 dB(A) and pump lights automatically dim when built-in sensors detect dark ambience.
AtmosAir Velaris performs as a dedicated alternating pressure surface in active therapy mode, but also provides non-powered pressure redistribution when the patient pressure risk level does not require alternating therapy.
AltoVac® Vacuum Technology
With the pump connected, the AltoVac Vacuum Technology sucks air out and inflates air in cycles to provide alternating pressure (AP) therapy with offloading capabilities.
Infection Control Design
Premium cover designed to last 2.5 times longer than ‘standard’ type covers when being used in the same environment. Welded seams and a watershed flap over the full length of the zipper to help prevent fluid ingress.
Comfort and Full Offloading
A top layer of visco-elastic foam and a base layer of firm foam is built into each air cell, offering comfort while eliminating the need for an additional foam layer between the patient and the air cells which can compromise active therapy. Offers firm foam perimeter to support ingress and egress.
Microclimate Management
Powered directly from the AtmosAir Velaris pump, the system can also offer the full microclimate and comfort benefits of Skin IQ®, without impacting the alternating pressure performance. Compatible with both Skin IQ standard and bariatric coverlet.
ARM® (Air Redistribution Module)
In non-powered mode, AtmosAir Velaris is an open pressurized system. The Velaris ARM — Air Redistribution Module maintains a predefined pressure level inside the cells.
Heel zone with active therapy
With a sloped heel zone combining AltoVac vacuum technology alternating air cells with a heel slope, the AtmosAir Velaris hybrid system offers offloading capabilities in the vulnerable heel area.
QuietConceptâ„¢ Pump & Automatic dimming LEDs
Pump has silent operation at 19 dB(A) and pump lights automatically dim when built-in sensors detect dark ambience.
| AtmosAir Velaris Range | |
|---|---|
| Top cover fabric options | Dartex Reliant or Premium |
| PVC free | Yes |
| Welded seams & handles as standard | Yes |
| Mattress fire tests*** | BS7177 (BS597-1, BS597-2, BS6807 Clause 9-Ignition Source 5), 16CFR1632, 16CFR1633, CAL TB 129 |
| Firesock as standard | Yes |
| AtmosAir Velaris Standard Mattress | |
| Top cover fabric options | Dartex Reliant or Premium |
| Standard sizes* (W x L x H) | 810 x 2000 x 180 mm (31 x 78 x 7 in) |
| Standard sizes* (W x L x H) | 860 x 1980 x 180 mm (34 x 78 x 7 in) |
| Standard sizes* (W x L x H) | 880 x 2020 x 180 mm (35 x 80 x 7 in) |
| Standard sizes* (W x L x H) | 880 x 2140 x 180 mm (35 x 84 x 7 in) |
| Standard sizes* (W x L x H) | 900 x 2000 x 180 mm (35 x 79 x 7 in) |
| Standard sizes* (W x L x H) | 1070 x 2000 x 180 mm (42 x 79 x 7 in) |
| Ability to connect to AtmosAir Velaris alternating pressure pump | Yes |
| Weight of mattress | 15.0 kg (33 lb) - 17.5 kg (39 lb) |
| Maximum patient weight | 250 kg (550 lb) |
| Expected service life | 5 years |
| AtmosAIr Velaris Plus Mattress | |
| Top cover fabric options | Dartex Reliant or Premium |
| Standard sizes* (W x L x H) | 1220 x 2140 x 180 mm (48 x 84 x 7 in) |
| Ability to connect to AtmosAir Velaris alternating pressure pump | Yes |
| Weight of mattress | 24 kg (53 lb) |
| Maximum patient weight | 454 kg (1000 lb) |
| AtmosAir Velaris Alternating Pressure Pump | |
| Size (W x L x H) | 337 x 107 x 200 mm (13.3 x 4.2 x 7.9 in) |
| Weight | 4.1 kg (9 Ib) |
| Alternating cycle time | 10 minutes |
| Supply voltage | 100 - 230 V |
| Power input | 3 - 46 VA |
| IP rating | IP22 |
| Case material | PC ABS |
| Sound output | 19 dBA |
| Lock out control panel feature | Yes |
| Suppress audible Alarm option | Yes |
| Alarm pause | Yes (15 mins) |
| Skin IQ adapter part number** | Power cable 636377 |
| Expected service life | 7 years |
| AtmosAir Velaris Stretcher Trolleys (ST) Mattress | |
| Top cover fabric options | Dartex Reliant or Premium |
| Standard sizes* (W x L x H) | 660 x 1910 x 130 mm (26 x 75 x 5 in) |
| Standard sizes* (W x L x H) | 670 x 1950 x 130 mm (26 x 77 x 5 in) |
| Standard sizes* (W x L x H) | 762 x 1910 x 130 mm (30 x 75 x 5 in) |
| Ability to connect to AtmosAir Velaris alternating pressure pump | No |
| Weight of mattress | 9 kg (20 lb) - 10 kg (22 lb) |
| Maximum patient weight | 250 kg (550 lb) |
| Expected service life | 5 years |
| AtmosAir Velaris Seat Cushion | |
| Top cover fabric options | Dartex Reliant or Premium |
| Standard sizes* (W x L x H) | 432 x 432 x 100 mm (17 x 17 x 4 in) |
| Standard sizes* (W x L x H) | 457 x 457 x 100 mm (18 x 18 x 4 in) |
| Ability to connect to AtmosAir Velaris alternating pressure pump | No |
| Weight of cushion | 1.5 kg (3 lb) |
| Maximum patient weight | 250 kg (550 lb) |
| Expected service life | 5 years |
| * Please contact your Arjo representative to enquire about product and size availability | - |
| ** Skin IQ coverlet and pump connector sold separately | - |
| *** Standards not available for Velaris Seat Cushion | - |
Explore this product
Filter
Filter
Choosing Support Surface Covers
Type: Leave behind / Brochure
PIP International Guidelines
Type: Leave behind / Brochure
AtmosAir Velaris Specification Sheet
Type: Specifications sheet / Flyer
AtmosAir Velaris Instructions for use
Type: Instructions for use (IFU)
AtmosAir Velaris - Plus Flex Quick reference guide - Use (A4, Portrait, Colour)
Type: Quick Reference Guide (QRG)
AtmosAir Velaris Quick reference guide - Cleaning and disinfection (A4, Portrait, Colour)
Type: Quick Reference Guide (QRG)
AtmosAir Velaris Quick reference guide - Controls (A4, Portrait, Colour)
Type: Quick Reference Guide (QRG)
AtmosAir Velaris Quick reference guide - Use (A4, Landscape, Colour)
Type: Quick Reference Guide (QRG)
The Science Behind the Support Surface
Type: Clinical evidence brochure
AtmosAir Velaris Performance Testing Whitepaper
Type: Whitepaper
AtmosAir Velaris S3I Performance Testing Whitepaper
Type: Whitepaper
Choosing Support Surface Covers
Type: Leave behind / Brochure
PIP International Guidelines
Type: Leave behind / Brochure
AtmosAir Velaris Specification Sheet
Type: Specifications sheet / Flyer
The Science Behind the Support Surface
Type: Clinical evidence brochure
AtmosAir Velaris Performance Testing Whitepaper
Type: Whitepaper
AtmosAir Velaris S3I Performance Testing Whitepaper
Type: Whitepaper
AtmosAir Velaris Instructions for use
Type: Instructions for use (IFU)
AtmosAir Velaris - Plus Flex Quick reference guide - Use (A4, Portrait, Colour)
Type: Quick Reference Guide (QRG)
AtmosAir Velaris Quick reference guide - Cleaning and disinfection (A4, Portrait, Colour)
Type: Quick Reference Guide (QRG)
AtmosAir Velaris Quick reference guide - Controls (A4, Portrait, Colour)
Type: Quick Reference Guide (QRG)
AtmosAir Velaris Quick reference guide - Use (A4, Landscape, Colour)
Type: Quick Reference Guide (QRG)
Velaris - Demonstration video
AtmosAir Velaris Introduction Video with animations
AtmosAir Velaris 30 sec TVC - One Surface Two Modes
AtmosAir Velaris 30 sec TVC - Time is Everything
_Product_Node_Hero_Image.jpg)
