Maxi 500

Maxi 500 floor lifter has been designed to help caregivers transfer dependent patients or residents in hospitals, nursing homes, homecare environments or other assisted living centres.

Lifting capacity
Safe working load of 227 kg (500 lb).

Familiarity
Spreader bar is available in 2-point loop configuration, or Arjo 4-point manual dynamic positioning system (DPS).

Dual controls
Maxi 500 can be operated from the mast or with the hand control, enabling the caregiver to stay close to the patient while operating the lifter.

Simplicity
Easy to understand and simple to operate.

Scale option
Integrating weighing into transfer procedures can eliminate an additional transfer to a fixed scale, which makes the routine easier for both patient and caregiver.

Maxi 500 features and benefits

High-friction solution
The friction solution reduces swinging of the spreader bar during patient transfers.

Dual controls
In addition to the hand control, the powered features of Maxi 500 can also be operated from the control panel on the mast.

Adjustable leg chassis
The adjustable leg chassis, operated from the hand control, allows access for patients transferring to wide chairs, wheelchairs or
toilets/commodes.

Low-friction castors
Low-friction castors, the rear two with brakes to secure the lifter in position during storage and when lifting from the floor.

Scale (option)
Optional suspended scale supports an efficient weighing routine.

Weight and dimensions
Max safe working load kg	227 kg
Max safe working load lb	500 lb
Lifter weight (with spreader bar and battery) kg	57 kg
Lifter weight (with spreader bar and battery) lb	126 lb
Max lifting height mm	1860 mm
Max lifting height in	73,25 in
Min lifting height mm	650 mm
Min lifting height in	25,6 in
Lifting stroke mm	1210 mm
Lifting stroke in	47,6 in
Min total storage height mm	1320 mm
Min total storage height in	52 in
External width legs closed mm	680 mm
External width legs closed in	26,75 in
External width legs open mm	1080 mm
External width legs open in	42,5 in
Internal width leg closed mm	550 mm
Internal width leg closed in	21,7 in
Internal width leg open mm	950 mm
Internal width leg open in	37,4 in
Leg clearance (floor to top of legs) - standard castors mm	120 mm
Leg clearance (floor to top of legs) - standard castors in	4,75 in
Chassis clearance (floor to bottom of chassis) – standard & low castors mm	28 mm
Chassis clearance (floor to bottom of chassis) – standard & low castors in	1,12 in
Lifter length mm	1140 mm
Lifter length in	44,9 in
Turning diameter mm	1330 mm
Turning diameter in	55,4 in
Electrical
Lifter protection class	IP24
Hand control protection class	IPX7
Battery	24V 4Ah