Total Lift Bed

Upright positioning in bed for highly dependent patients

Prolonged bed rest and immobility of critically ill patients can lead to severe physical deconditioning, significant loss of muscle mass and increased muscle weakness that can result in extended time spent in both the ICU and the hospital¹. Recognition of the long term physical and psychological consequences of prolonged immobility has resulted in early mobilisation being advocated for ICU patients². While early standing and weight bearing is a desirable goal, achieving this consistently with critically ill patients can be a challenge for caregivers. Using only one or two caregivers, the Total Lift Bed™ can progressively move patients to full standing and weight bearing to aid rehabilitation early in the acute phase of critical illness.

References:
1. Truong AD, Fan E, Brower RG, Needham DM. Mobilizing patients in the intensive care unit from pathophysiology to clinical trials. Crit Care. 2009;13:216.
2. Morris PE, Goad A, Thompson C, et al: Early intensive care unit mobility therapy in the treatment of acute respiratory failure. Crit Care Med. 2008;36(8):2238-2243

Patented weight bearing control system
• As the bed tilts the change in weight bearing achieved by the patient is displayed on the Foot Lifter footboard. This visual feedback helps caregivers to monitor progress, and set milestones against rehabilitation and mobility objectives.

Flexible positioning
• In addition to progressive standing and weight bearing, the Total Lift Bed offers flexible patient positioning to help with care procedures and patient mobilisation. It also allows for Trendelenburg position which provides head down positioning for selected care procedures.

Skin protection
• The integrated five zone pressure redistribution surface provides caregivers with a choice of low air loss or alternating pressure options to help in the prevention and management of pressure injury. Mattress firmness can be altered using the comfort controls.

In bed chair position
• The in bed chair facility helps orientate the patient to a more upright position with legs down between standing episodes. The foot board’s position can be adjusted from the handset to accommodate different patient needs.

Complying with early mobility protocols
• Without leaving the bed patients who need a graded transition from bed rest to supporting their full body weight, can be progressively moved to the standing position.

Patented Foot Lifter™ Footboard
• When the tilt function is activated, the patented Foot Lifter moves towards the patient’s feet. When contact is made the bed begins gently tilting to the desired angle or weight bearing ratio while maintaining the patient in position to help avoid the need for repositioning. The Foot Lifter will automatically adjust to become flush with the floor for patient egress from the bed if appropriate.

Safety during movement and while standing
• A flexible strap system helps secure the patient in position during movement to the upright position.

Product
Safe working load kg	280 kg
Safe working load lb	616 lb
Maximum patient weight kg	193 kg
Maximum patient weight lb	425 lb
Safety standard IEC	IEC 60601-1 3rd Edn IEC 60601-2-52 IEC 606-1-6 IEC 62366
CE	MDD93/42 EEC
FDA	CFR21 Part 820
Dimensions
Overall standard length (HOD) mm	2180 mm
Overall standard length (HOD) in	85,83 in
Overall width mm	1040 mm
Overall width in	40,95 in
Overall length, extended (HOD) mm	2280 mm
Overall length, extended (HOD) in	89,76 in
Top height (with 125 mm castors) mm	755 mm
Top height (with 125 mm castors) in	29,72 in
Low height (with 125 mm castors) mm	525 mm
Low height (with 125 mm castors) in	20,67 in